Fertilizer Injector Calculator.
Fertilizer Injector Calculator
How much fertilizer goes in your stock tank to feed the ppm you want through your injector, what the feed delivers, what it costs, and whether the injector is doing its job.
To fill an injector stock tank, multiply the ppm of nitrogen you want by the injector's dilution (the 100 in 1:100), then divide by the product of the fertilizer's percent nitrogen and 75. The answer is ounces of fertilizer per gallon of stock. Feeding 200 ppm N from a 20-10-20 through a 1:100 injector takes about 13.3 ounces per gallon of stock: 200 × 100 ÷ (20 × 75). A 1:200 injector spreads each gallon of stock through twice as much water, so its stock needs twice the fertilizer. Enter your fertilizer, injector and tank below for the full amount, the phosphorus and potassium it delivers, and the cost.
How the calculation works
One ppm is one milligram per liter. A fertilizer that is 20% nitrogen gives 200 mg of nitrogen for every gram dissolved, so a liter of feed at 200 ppm N needs 1 gram of it. An injector at 1:100 draws one part of stock into every hundred parts of feed, so the stock has to be a hundred times stronger: 100 grams per liter. Written out, grams per liter of stock = ppm × dilution ÷ (% nutrient × 10). In US units the 10 becomes 75 for ounces per gallon, the constant UMass Extension uses (74.9 exactly). The calculator uses 75 in US units so its answers match the extension's own; the exact figure would add 0.15%.
Fertilizer labels list phosphorus as P₂O₅ and potassium as K₂O, not as the elements. To get the elemental percent the plant sees, the calculator multiplies P₂O₅ by 0.4364 and K₂O by 0.8301, the factors in e-GRO's fertilizer calculation alert. A 20-20-20 is 8.7% P and 16.6% K.
Checked against the published examples: UMass's 15-16-17 at 250 ppm N through a 1:200 injector needs 44.4 ounces per gallon of stock, so a 25-pound bag makes about 9 gallons (this calculator: 44.4 ounces, 9.0 gallons). UMass's 25-10-10 at 450 ppm N through 1:100 needs 1.5 pounds per gallon (1.50). Potassium nitrate for 200 ppm K at 1:100 needs 7.3 ounces per gallon and brings about 71 ppm N (7.31 and 71). e-GRO's 13-2-13 at 200 ppm N through 1:100 needs 20.5 ounces per gallon (20.5).
The two injector checks come from the same sources. The flow check divides the feed you collected by the stock the injector drew: e-GRO's example drew 6.4 fluid ounces of stock into a 640-ounce bucket, which is 1:100. The EC check subtracts your water's EC from the feed's EC and compares the difference with the EC the label lists for that rate. UMass's example measured 1.72 mS/cm above the water where the label said 1.48 at 200 ppm, which means the feed carried about 232 ppm N and the injector was running near 1:86.
When one stock tank is not enough
Calcium fertilizers and phosphate or sulfate fertilizers cannot share a concentrated stock tank: the calcium falls out as a solid, clogs the injector and lines, and never reaches the crop. Hydroponic and many greenhouse feeds use two tanks for this reason: calcium nitrate (and iron chelate) in one, the phosphates, sulfates and micronutrients in the other, each drawn by its own injector head (e-GRO). Run this calculator once per tank, and put the target for each at what that tank supplies.
What it does not do
- It works one fertilizer per tank. To build a feed from several salts and see every element against a crop's targets, use the Nutrient Recipe Builder.
- It does not know how much of your fertilizer will dissolve. A very strong stock can leave solids at the bottom; if it does, use a bigger tank or a lower injector ratio.
- The EC estimate scales the label's EC in a straight line with the feed rate and adds your water's EC. It is a check on your mix, not a lab analysis.
- It assumes the injector delivers the ratio it is set to. Check it with the flow or EC method before each season, as e-GRO recommends.
- It does not account for the pH the fertilizer leaves behind. For water alkalinity, use the Alkalinity and Acid Calculator first.
Learn more from the extension specialists
- e-GRO Alert 12.33, Verifying the Proper Functioning of Fertilizer Injectors (Toro-Herrera, Caballero and Raudales, UConn, 2023): the flow and EC checks, step by step.
- e-GRO Food Crops Alert 3.05, Fertilizer Calculation Basics for Hydroponics (Mattson, Cornell, 2018): the arithmetic, P and K conversions, and the two-tank split.
- e-GRO Alert 14.16, What Wood Cause This? Unexpected Fertilizer Injector Problems (Currey, Iowa State, 2025).
- e-GRO Alert 4.12, A Plain and Simple Checklist for Injector Problems (Thomas, Georgia, 2015).
- e-GRO Alert 11.08, Jar Test: Determining Fertilizer Solubility and Compatibility (Owen and Whipker, Kentucky and NC State, 2022).
- Every e-GRO alert on injectors, fertilizer and EC, indexed by crop and problem, in Greenhouse Alerts.
Sources
- UMass Extension Greenhouse Crops and Floriculture Program. Fertilizer Calculations for Greenhouse Crops (updated 2026). The stock formula and its constants (75 for ounces per gallon, 1,200 for pounds per gallon, 10 for grams per liter), the worked examples and the EC check.
- Smith, T. Fertilizer Injectors for Greenhouses. UMass Extension, 2009, reviewed 2015. Ratio and percent settings, measuring by weight.
- Mattson, N. 2018. Fertilizer Calculation Basics for Hydroponics. e-GRO Food Crops Alert 3.05. The P₂O₅ and K₂O conversion factors (0.4364 and 0.8301), the 1:50 to 1:200 range and the two-tank split.
- Toro-Herrera, M., C. Caballero and R.E. Raudales. 2023. Verifying the Proper Functioning of Fertilizer Injectors. e-GRO Alert 12.33. The flow and EC methods and the 2% to 3% tolerance.
CC BY 4.0. Cite as "Open Agriculture Technology Fertilizer Injector Calculator (openagriculturetechnology.com)".
Frequently asked questions.
How do I calculate how much fertilizer to put in my injector stock tank?
Ounces per gallon of stock = target ppm × the injector's dilution ÷ (percent of the nutrient × 75). For 200 ppm N from a 20-10-20 through a 1:100 injector: 200 × 100 ÷ (20 × 75) = 13.3 ounces per gallon, so a 50-gallon stock tank takes about 42 pounds. In metric, grams per liter of stock = ppm × dilution ÷ (percent × 10).
What does a 1:100 injector ratio mean?
One part of stock solution goes into every hundred parts of the feed that comes out, so the stock is a hundred times stronger than what the plants get. It is the same as a 1% setting; 1:50 is 2% and 1:200 is 0.5%. The higher the second number, the stronger the stock has to be: a 1:200 injector needs twice the fertilizer per gallon of stock that a 1:100 does.
How much 20-10-20 per gallon of water for 200 ppm nitrogen?
Mixed straight into the water you apply, with no injector, it is about 0.13 ounces per gallon, or 13.3 ounces per 100 gallons (about 3.8 grams per gallon, or 1 gram per liter). Through a 1:100 injector, the same 13.3 ounces goes into each gallon of stock.
How do I check if my fertilizer injector is working right?
Two ways, from e-GRO Alert 12.33. By flow: set the injector, draw the stock from a measuring cylinder while you fill a 5-gallon bucket (640 fluid ounces), and divide 640 by the ounces of stock drawn; 6.4 ounces means 1:100. By EC: subtract your water's EC from the feed's EC and compare it with the EC on the fertilizer label for that rate. Within 2% to 3% is acceptable. Check before every growing season.
How do I convert P2O5 and K2O on a fertilizer label to P and K?
Multiply P₂O₅ by 0.4364 to get elemental phosphorus and K₂O by 0.8301 to get elemental potassium. A 20-20-20 fertilizer is 20% N, 8.7% P and 16.6% K. Crop targets in ppm are almost always given as the elements, so convert before you compare.
Can calcium nitrate go in the same stock tank as other fertilizers?
Not with phosphate or sulfate fertilizers. At stock strength the calcium combines with them and drops out as a solid that clogs injectors and lines. Put calcium nitrate in one tank and the phosphates, sulfates and micronutrients in another, each with its own injector head, which is the standard two-tank split in e-GRO's hydroponic fertilizer alert.
How many gallons of fertilizer water does a stock tank make?
The tank's volume times the injector's dilution. A 50-gallon stock tank through a 1:100 injector makes 5,000 gallons of feed; through 1:200 it makes 10,000 gallons, with twice the fertilizer in it.
Why does my feed EC not match the fertilizer label?
First subtract your water's own EC: the label lists the fertilizer's contribution only. If the difference is still off, the stock was mixed wrong, the fertilizer did not fully dissolve, or the injector is not delivering its set ratio. In UMass's example a feed reading 1.72 mS/cm above the water, where the label said 1.48, meant 232 ppm N instead of 200 and an injector running near 1:86.