Growing · Threats · Problem

Powdery mildew.

What this is
A problem page: what it is and what to do
Needs
Humidity, not water on the leaf
Updated
2026-11-17

A white, dusty coating on leaves, stems or flowers is powdery mildew, a group of fungi that rarely kill a crop but can cut fruit yield, make herbs and greens unsaleable, and devastate a poinsettia crop (e-GRO Food Crops Alert 5.05; Alert 12.31). Unlike gray mold, it does not need water on the leaf: its spores germinate in humid air, and moderate to warm greenhouse temperatures suit most of them (e-GRO Food Crops Alert 5.05). Spores blow in and cannot be screened out, so control comes from scouting early, lowering humidity, moving air, and removing infected tissue, with fungicides or biological products when that is not enough (e-GRO Food Crops 5.05; Alert 14.15).

How to tell it is powdery mildew

  • The classic sign is white, powdery growth on the upper leaf surface, which is the fungus itself (e-GRO Food Crops 5.05).
  • Look low and look under. Lower, mature and shaded leaves often show it first (e-GRO Food Crops 5.05; Alert 14.15). On poinsettia the first symptoms are pale yellow spots on top of the leaf with white or light gray growth underneath (e-GRO 12.31).
  • When the air is drier it hides. Below about 75% humidity, infections may show only as yellow or purplish patches with little or no white growth, as on sedum and fuchsia (e-GRO 14.15).
  • Each crop has its own. Powdery mildew fungi are mostly host-specific, so mildew on lettuce is very unlikely to spread to tomatoes; mildew on several unrelated crops at once is usually several different species (e-GRO Food Crops 5.05; Alert 14.15).

A diagnostic lab can confirm it if you are unsure (e-GRO 12.31).

What to do

  1. Remove infected leaves, stems or whole plants to slow the spread to plants of the same species or family (e-GRO 14.15).
  2. Lower the humidity. For poinsettia, keep it under 85% (e-GRO 12.31). Vent and dehumidify through the day, cover nutrient tanks and fix leaks, cut leachate onto the floor, and consider concrete over dirt or gravel floors (e-GRO Food Crops 5.05).
  3. Move air with horizontal airflow fans (e-GRO Food Crops 5.05).
  4. Treat if scouting still finds new mildew after the humidity and airflow changes, and do not wait for it to explode (e-GRO 12.31). Apply fungicides before the disease builds, at the label interval, rotating modes of action; options narrow later in a crop, and some labels warn against spraying poinsettia bracts. Test any product new to you on a few plants first (e-GRO 12.31). Softer options work in different ways: potassium bicarbonate makes the leaf surface inhospitable to spores, and microbial products colonize the leaf first and outcompete them or coat it with compounds that discourage them (e-GRO Food Crops 5.05). For food crops, check that the product is labeled for the crop and note its pre-harvest interval.
  5. Keep scouting. Unlike downy mildew, powdery mildew can be brought under control after it appears, and plants can recover fully or nearly so (e-GRO Food Crops 5.05).

The conditions that drive it

Most powdery mildews do best at moderate to warm greenhouse temperatures, and the best temperature for spore germination differs from one species to the next (e-GRO Food Crops 5.05). On poinsettia, temperatures below 86°F with relative humidity of 85% or more favor rapid development, high temperatures slow or halt it, and fall, at 68 to 86°F, is when to watch most closely (e-GRO 12.31). Warm days followed by cool nights with high humidity set off outbreaks in spring, and the places where temperature swings most, near vents and doors, are where to look first (e-GRO 14.15). The spores spread mainly on air currents (e-GRO 14.15), and since no commercial screen is fine enough to stop them, managing humidity and airflow is the main defense (e-GRO Food Crops 5.05). The humidity and VPD pages cover running a greenhouse in the range that keeps disease down.

Powdery or downy mildew?

The names are similar, but the diseases are not. Downy mildew is a water mold, not a fungus, and favors cooler temperatures than most powdery mildews. Its first sign is usually patchy yellowing between the veins on top of the leaf, with growth on the undersides later, and it can collapse a crop and cannot be fixed after the fact. Powdery mildew grows on the upper surface as white powder and can be managed once it appears (e-GRO Food Crops 5.05). If you see yellow patches with growth underneath, check closely: early poinsettia powdery mildew also starts with yellow spots and growth on the leaf underside (e-GRO 12.31).

Extension alerts on powdery mildew

Short alerts on powdery mildew from university greenhouse specialists, published through e-GRO. The 6 newest below; each opens the alert itself on e-gro.org.

Search every e-GRO alert on powdery mildew in Greenhouse Alerts, indexed by crop and problem.

Tools and related pages

Sources

Frequently asked questions.

What does powdery mildew look like?

A white, powdery or dusty growth on the upper surfaces of leaves, and sometimes stems and flowers, often first on lower, shaded leaves. When the air is drier, under about 75% humidity, it may show only as yellow or purplish patches with little white growth (e-GRO Food Crops Alert 5.05; Alert 14.15).

What causes powdery mildew in a greenhouse?

A group of fungi whose spores blow in on the air and germinate in humid conditions. On poinsettia it develops fastest below 86 F at 85% relative humidity or higher, and warm days with cool, humid nights set off spring outbreaks (e-GRO Alerts 12.31 and 14.15).

Does powdery mildew need water on the leaves?

No. Unlike Botrytis gray mold, which needs free water, powdery mildew spores germinate under high humidity alone. That is why lowering humidity and moving air matter more than keeping leaves dry (e-GRO Food Crops Alert 5.05).

How do I get rid of powdery mildew on plants?

Remove infected leaves or plants, lower the humidity (under 85% for poinsettia), add horizontal airflow, and apply fungicides early at label intervals, rotating modes of action. Potassium bicarbonate and microbial products are softer options. Plants can recover fully or nearly so once it is under control (e-GRO Alerts 12.31 and 14.15; Food Crops 5.05).

Can powdery mildew spread from one crop to another?

Usually not. Powdery mildew fungi are mostly host-specific, so mildew on lettuce is very unlikely to infect tomatoes, and mildew on several unrelated crops is usually several different species (e-GRO Food Crops Alert 5.05; Alert 14.15).

What is the difference between powdery mildew and downy mildew?

Powdery mildew is a fungus that grows as white powder on top of the leaf and can be managed after it appears. Downy mildew is a water mold that favors cooler weather, shows first as patchy yellowing between the veins with growth underneath, and can collapse a crop (e-GRO Food Crops Alert 5.05).

What humidity stops powdery mildew?

There is no single number for every crop. For poinsettia, keeping relative humidity under 85% is the advice, and high temperatures, above about 86 F, slow or halt it. Dehumidifying, venting and horizontal airflow fans are the tools (e-GRO Alert 12.31; Food Crops Alert 5.05).

Is powdery mildew on food crops safe to eat?

e-GRO does not cover food safety. What it does say is that buyers tolerate very little mildew on herbs and greens, so infected leafy crops can be unsaleable at harvest, and heavy infection cuts the yield of tomato, cucumber and pepper (e-GRO Food Crops Alert 5.05).